Shanghai Fanying Machinery Technology Co., Ltd.
Shanghai Fanying Machinery Technology Co., Ltd.Our company follows the business philosophy of "Technology Lead, Innovation Motivation, Quality First, Service Centric, Talent Fundamental" and the
Add to Cart
Button Control System 3 Inch 5.5KW CBK-120 Hose Crimping Machine
OUR EQUIPMENT'S DECRIPTION
Precautions for pipe press
1. When crimping, place the joint in the center of the mold as much as possible, and do not press on the hexagonal nut.
2. Prevent tools and other foreign objects from entering the press head.
3. After the work is completed, the eight mold bases must be opened to the maximum extent, so that the spring can be in an open state and the spring can be maintained, and the oil cylinder is also in a pressure relief state to extend the life of the oil seal.
4. Please note that the voltage of the motor is 380V or 220V before purchasing.
5. In winter or in cold areas, use better quality hydraulic oil in the fuel tank.
FY-CBK-120 hose pressing machine is famous for its intelligent control system and large opening mouth. With a super crimping force, it can crimp hydraulic hose R15 R13 up to 3 inch.
MAIN FEATURES
1. Thin head, easy fed for bend fitting;
2. Big crimping power;
3. High accuracy.
The features of big range rubber hose crimping machine
1.Easy operating and portable
2.Fast speed and high efficiency
3.Low noise and low maintenance cost
4.High quality and favourable price
5.Durable and stable
6.Long life for using
7.Have a large range of crimping
8.Suitable different pressure of hoses
9.Have big power
Kindly reminder
1.Before using the machine,pls read and take care of the manual operation .
2.Pls confirm that the voltage coincide with the standard of ours
3.Don’t allow children,elderly people and the disabled to touch even make use of the machine.
4.When the machine go out of service,pls turn off the power source.
How to Crimp the Ends on a Hydraulic Hose?
1 Insert one end of a length of hydraulic hose into the hydraulic hose fitting. Make sure it is securely in place.
2 Set the micrometer on the hose-crimping machine according to manufacturer specifications for the kind of hose and fitting you are using. Find these specifications in the hose-crimping machine's manual.
3 Place the fitting end of the hose into the crimping machine and line up the fittings mark on the machine with the top of the hose.
4 Insert the compression ring into the crimping machine.
5 Activate the hosecrimping machine.
The crimping machine's press will exert pressure on the compression ring, causing the compression mechanism to press against the hydraulic hose fitting and crimp it in place.6 Repeat this process with the remaining end of the hydraulic hose
The attention about the big range rubber hose crimper machine
1.Motor start:Pay attention to the direction of rotation of the motor and pump rotation direction or arrow direction.
2.Before the operation:Check the hydraulic oil tank .
3.Normal operation:For the first 30 minutes please do the running after normally begin to use the machine
4.Hydraulic oil:No any regulation for oil spill valve,the highest pressure must not exceed the rated pressure .Pressure hazard!Danger of injury.
5.System failure:If system failure happen,do not blindly process.Please in accordance with the operation manual or sequence analysis to deal with the problems or find professional repair engineer to solve problems.
TECHNICAL DATA
| Model | FY-CBY-120 Hose Pressing Machine |
| Crimping Range | 6-76(mm)(1/4~3") |
| Crimping Force | 1500(T) |
| Hose Size | 1/4-3(inch) |
| Max. Opening | 158mm |
| Die Sets | 15 |
| work efficiency | 300pcs/h |
| System Pressure | 31.5(Mpa) |
| Accuracy | 0.01(mm) |
| Control | PLC |
| Standard Voltage | 380V |
| Motor Power | 5.5(KW) |
| Length | 1000(mm) |
| Width | 800(mm) |
| Height | 1630(mm) |
| Weight | 1250(KG) |
NOTE
- Customized die sets are available;
- Special voltage 110V/220V/380V/415V 50/60Hz are availbale;